DIY: Recycled Plastic Bottle Light Shades

What to do:
Step 1: Use a sharp craft knife to cut off the bottom section of the plastic bottle.

Note: You can only use CFL light globes in the fitting, as anything else heats up and will melt the plastic shade.

Step 2: Screw the top half of the bottle to the light fitting

Step 3: Optional - you may spray paint the outside of the plastic in any colour of your choice.

What you need:
1. 2 litre juice bottles
2. craft knife
3. optional: spray paint - colour of your choice

Estimated time needed: 15 minutes plus drying

ref: easydiy.co.za